Acumen DataBridge SDR2-CF Manuel d'utilisateur télécharger pdf (Page 7)

Click! 510

38400 bps à

57600 bps à

115200 bps à

Conguration Features

Push-button on faceplate does the following:

■

Enters sensor emulation mode à

Enters test pattern mode à

Lets you manually select the baud rate à

Autobauds the device to match the baud rate of the at- à

tached serial device

Runs a data link latency test à

Resets to device factory defaults à

Multicolored LEDs have activity indicating function:

■

Red LED illuminates when device has power à

Green LED (TD) illuminates when data is transmitted à

Yellow LED (RD) illuminates when data is received à

Multicolored LEDs also act as operation mode indicators

■

Two banks of LEDs (yellow and red) display submenu selections

■

and application information

DIP switches for selection of run mode versus programming

■

mode, multi-function inputs and supply voltage monitor thresh-

olds

Testing Features

Sensor emulation mode:

■

Emulates SmartSensor V à

Pushes and responds to polls for SmartSensor V event à

data

Interacts with Click! 172/174 or similar contact closure à

cards

Test pattern mode:

■

Sends ASCII sequences and LED patterns to other Click! à

510 modules or to computers to check communication link

Ordering Information

Part Number — WX-CLK-510

Wavetronix

78 East 1700 South

Provo, UT 84606

Phone: 801-764-0277

Fax: 801-764-0208

Email: sales@wavetronix.com

Website: www.wavetronix.com

Technical Specications

Physical

Weight: 0.29 lbs (0.1 kg)

■

Physical dimensions: 4.5 in. × 4 in. × 0.9 in. (11.4 cm x 10.2

■

cm x 2.3 cm)

Ambient operating temp: -29°F to 165°F (-34°C to 74°C)

■

Humidity: up to 95% RH

■

Mounting

DIN rail–mountable

■

Hot-swappable

■

Power

Power supply voltage: 10 to 30 VDC

■

Power consumption: 0.8 W

■

Connections

Power:

■

5-position connector from the T-bus à

Voltage input monitoring with settable thresholds of 11.7 à

or 22.9 VDC

Four independent physical serial ports

■

RS-232 front: DB-9 female DCE connector with DIP switch à

override to select between programming and run mode

RS-485 top: 5-position connector for connecting from à

T-bus

RS-232 top: Pluggable screw terminal à

RS-485 top: Pluggable screw terminal and an RJ-11 jack à

Two multi-function digital input ports

■

Low-level AC input monitoring via clamp-on split-core à

current transformers with 1 W 120 VAC load threshold

suitable for monitoring incandescent or LED signal indica-

tion status

Contact closure input monitoring circuit that also serves to à

monitor low-level DC logic with threshold at 2.5 V

DC voltage input monitoring with selectable thresholds of à

9, 11.7 and 23.4 VDC

Maximum input event frequency of 250 Hz à

Two solid state contact closure output ports

■

250 Hz output signaling capability à

Communication

Converts RS-232 to RS-485 and vice versa

■

Baud Rates

Supports the following baud rates:

■

1200 bps à

2400bps à

4800 bps à

9600 bps à

19200 bps à

www.wavetronix.com

1 2 3 4 5 6 7 8 9 10 11 12 ... 28 29

Commentaires sur ces manuels

Pas de commentaire

Acumen DataBridge SDR2-CF Manuel d'utilisateur Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Acumen DataBridge SDR2-CF